Molded Lateral Wyes
Size Range
SDR
11
IPS
2" to 12" IPS
Rated For
Water: 200 PSI at 73° F
Sustainable maximum operating pressure
Details
Engineered for durability, built to last – Strongbridge offers a comprehensive range of high-density polyethylene (HDPE) molded butt fusion lateral wyes, engineered for extreme durability, and manufactured using HDPE PE4710 / PE100 virgin resin.
Our heavy-duty reinforced molded lateral wyes are fully pressure-rated for superior performance and are designed with no internal reduction to impede flow.
HDPE molded butt fusion lateral wyes are crucial components in piping systems that enable the division or diversion of flow in multiple directions. Their Y-shaped configuration facilitates the connection of three pipes at a single point, ensuring a smooth transition while maintaining the structural integrity of the pipeline.
Technical Notes
Engineered for PE100, PE80, PE4710, PE3408 HDPE Pipe Systems.
Resin Specifications
Strongbridge fittings are manufactured using a bimodal high-density polyethylene (HDPE) compound, engineered for superior performance. This specialized pellet-form compound incorporates stabilizers and carbon black, ensuring long-term durability, UV resistance, and reliable stability in demanding applications.
| Resin Properties | Resin Specification Data |
|---|---|
| Resin type | Polyethylene |
| Resin sub-type | HDPE |
| Density | 960 kg/m³ |
| Melt flow rate (190° C/5 kg) | 0.25 g/10min |
| Tensile modulus (1 mm/min) | 1100 MPa |
| Tensile stress at yield (50 mm/min) | 25 MPa |
| Tensile strain at break | >600 % |
| Carbon black dispersion | ≥ 3 |
| Oxidation induction time (210° C) | ≥ 20 min |
| Carbon black content | 2.0 - 2.5 % |
| Resistance to slow crack growth (9.2 bar 80° C) | >1000 h |
| Resistance to rapid crack propagation (S4 test, Pc at 0° C, Test pipe 250mm, SDR11) | ≥ 10 bar |
Part Numbers & Specs
Features
High-density polyethylene PE100, PE80, PE4710, PE3408
Your best choice for a leak-free system
High chemical resistance
Impact resistance at low temperatures
Resistant to corrosion and abrasion
Lightweight
Easy installation
Suitable for water, fluids, and slurries
Butt fusion, electrofusion, and mechanical connection ready
Standards & Certs
Manufactured in accordance with:
Downloads
Specification Sheet
Sales Sheet
Catalog
| Part Number | Size | IPS/DIPS | SDR | Description | Actual Size (d) | L1 | L2 | L3 | L | Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 04-BWY-2604001 | 2" | IPS | 11 | SBI 2" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 2.38 | 6.14 | 12.87 | 11.97 | 22.40 | 2.20 |
| 04-BWY-2604002 | 3" | IPS | 11 | SBI 3" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 3.50 | 6.69 | 14.33 | 10.79 | 22.99 | 4.60 |
| 04-BWY-2604003 | 4" | IPS | 11 | SBI 4" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 4.50 | 6.18 | 17.13 | 13.15 | 26.50 | 8.60 |
| 04-BWY-2604004 | 6" | IPS | 11 | SBI 6" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 6.63 | 6.89 | 25.39 | 18.66 | 35.71 | 25.80 |
| 04-BWY-2604005 | 8" | IPS | 11 | SBI 8" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 8.63 | 7.64 | 27.64 | 18.15 | 38.78 | 47.00 |
| 04-BWY-2604006 | 10" | IPS | 11 | SBI 10" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 10.75 | 8.35 | 30.43 | 19.02 | 43.31 | 80.90 |
| 04-BWY-2604007 | 12" | IPS | 11 | SBI 12" IPS, Molded Lateral Wye, SDR11, PE100/4710, 200psi water, NSF 61 | 12.75 | 8.35 | 32.84 | 18.9 | 47.24 | 119.90 |